Epson PowerLite 1705c Benutzerhandbuch

Ideally, you should place the projector directly in front of the center of 
the screen, facing it toward the screen squarely. The base of the lens 
should be at about the level of the bottom of the screen.  

If you place the projector below screen level, you’ll have to tilt it up by 
extending the front adjustable foot. This causes the image to become 
“keystone” shaped, but you can correct the distortion by pressing the 
buttons on the projector. See page 23 for detailed information about 
correcting the image shape. 

For instructions on installing the projector in a permanent location, 
such as a theater or conference room, see page 175.

Make sure your projector and other equipment are set up as described 
on page 35. Then follow the instructions below to start the projector 
and display an image. 

Turn on any connected computer or video equipment before starting 
the projector so it can automatically detect and display the image 
source. If you turn on the projector first, or have multiple pieces of 
connected equipment, you may have to select the image source 
manually (see page 19). 

®

Screen

Projector