Epson PowerLite 1705c Benutzerhandbuch

When you use EasyMP, you can output the sound to external speakers 
with built-in amplifiers. First, you need to use the Settings menu to set 
the 

EasyMP Audio Out

 option to 

External

. See page 121 for 

instructions. 

To connect speakers to the projector, follow these steps: 

1. Locate the appropriate cable to connect your speakers. 

Depending on your speakers you may be able to use a 
commercially available audio cable with a stereo mini-jack 
connector on one end and pin jacks on the other end. For some 
speakers, you may have to purchase a special cable or use an 
adapter.

2. Connect the stereo mini-jack end of the audio cable to the 

Audio 

port on the projector. 

  

3. Connect the other end(s) of the cable to your speakers. 

The projector’s internal speaker system is disabled while sound is 
output to external speakers, and you can’t use the projector or remote 
control to control the volume.