Epson P-5000 Benutzerhandbuch

Epson P-3000/P-5000

10

 -

 Epson P-3000/P-5000

9/06

You can transfer video files directly from memory cards as 
described on page 6. Or you can copy and convert video files 
from your computer, as described on page 13.

1. Use the 4-way ring to select 

Backup Files

 or 

My Videos

, 

then press 

OK

.

2. Select the folder containing the video you want to play, then 

press 

OK

. 

3. Use the 4-way ring to select the video you want to play, 

then press 

OK

. 

❏ To play or pause the video, press 

OK

. 

❏ To adjust the audio volume, press 

 or 

.

❏ To rewind or fast-forward, press left or right on the 4-way 

ring. Press repeatedly to increase the speed. (This function 
may not work with some videos, such as .mov).

❏ To stop the video and return to the previous screen, press 

Back

. 

The viewer remembers where you stopped. When you 
resume, playback starts 3 seconds before the stop point (for 
videos longer than 1 minute). If you want to play the video 
from the beginning, press 

Menu

, select 

Play Settings

, then 

select 

Play from Beginning.

❏ To view information about the video, press 

Display

. You 

see a progress bar on the video. Press 

Display

 again to view 

information including frame rate, bit rate, and video and 
audio codecs:

You can connect the viewer to a TV or AV projector and view 
your images, videos, and slide shows. 

You’ll need a camcorder AV cable (3.5 mm mini-plug to 
3 RCA plugs), available at many electronics stores. 

1. Connect the three RCA plugs to the video and audio 

IN

 

jacks on your TV or projector. 

2. Connect the mini-plug on the other end to the 

A/V Out 

connector on the side of the viewer. The LCD screen turns 
off.

3. Set the TV display to video input from the viewer.

Note: Some TVs may crop your images on the top and bottom.

You can now use all of the viewer controls to play slide shows, 
photos, and videos on your TV or projector.

You can transfer audio files from your computer and play 
them on the viewer. You can create playlists using the Epson 
Link2 software on your computer, or using the viewer itself.

First, make sure you have installed the Epson Link2 software, 
following the instructions in your P-3000/P-5000 Basics guide. 

WMA and WAV files are automatically converted to M4A 
when they are transferred. You can specify conversion settings 
if necessary; see your User’s Guide for instructions.

1. Connect the AC adapter to the viewer and plug it in. 

2. Turn on the viewer and your computer.

3. Use the included USB cable to connect the viewer to your 

computer.

The LCD screen turns off.

4. Double-click the 

 

Epson Link2

 icon on your desktop to 

open the program. 

Smaller end

Larger end