Epson BrightLink Pro 1410Wi Meeting Room Productivity Tool with Wall Mount Installationsanleitung
12
Installation worksheet for projecting on a plain wall
7.
Determine the aspect ratio of the board or of the images that will be projected. For
new computers or laptops, this will most likely be WXGA (16:10). For older
equipment, this will most likely be XGA (4:3). You may need to consult your IT director
for this information.
new computers or laptops, this will most likely be WXGA (16:10). For older
equipment, this will most likely be XGA (4:3). You may need to consult your IT director
for this information.
___ 4:3 XGA ___ 16:10 WXGA ___ 16:9 Widescreen
8.
Using the tables on pages 16 to 23 for your aspect ratio and desired image height (h),
find the required distance between the top of the image area and the wall plate (c).
find the required distance between the top of the image area and the wall plate (c).
_____ (c)
9.
Determine the position for your projector installation by adding the values for (f ), (h),
and (c), plus an additional 10 inches for the height of the wall plate plus the cover.
and (c), plus an additional 10 inches for the height of the wall plate plus the cover.
If the ceiling height of your room (as noted in step 1) does not meet the minimum
ceiling height required for your board, you may need to select a smaller image size or
move the board to a lower position on the wall.
ceiling height required for your board, you may need to select a smaller image size or
move the board to a lower position on the wall.
_____ (f )
_____ (h)
_____ (c)
+10 inches
_____ total
10. After confirming your image size, use tape or a pencil to mark the distance (c) from
the top of the image area on the board to the bottom of the wall plate.
11. Align the line (horizontal) on the template sheet with the (c) mark, then align the
center line on the template sheet with the center of the image area. Follow the
instructions on page 25 to install the projector.
instructions on page 25 to install the projector.
1.
Measure the ceiling height (distance from the floor to the ceiling).
_____
2.
Determine the desired aspect ratio of the image. For new computers or laptops, this
will most likely be WXGA (16:10). For older equipment, this will most likely be XGA
(4:3). You may need to consult your IT director for this information.
will most likely be WXGA (16:10). For older equipment, this will most likely be XGA
(4:3). You may need to consult your IT director for this information.
___ 4:3 XGA ___ 16:10 WXGA ___ 16:9 Widescreen
3.
Using the tables on pages 16 to 23 for your aspect ratio, select the largest image size
available for your ceiling height.
available for your ceiling height.
Image height (h)
Image width (w)
_____ (h)
_____ (w)
4.
Determine the desired distance from the floor to the bottom of the image area (f ).
The recommended minimum distance is 30 inches. Images appearing less than 28
inches from the floor may be obstructed for some viewers.
inches from the floor may be obstructed for some viewers.
_____ (f )
5.
Find the top of the projected image area by adding distances (f ) and (h).
_____
6.
Use the tables on pages 16 to 23 to determine the required distance from the top of
the image area to the bottom of the wall plate (c).
the image area to the bottom of the wall plate (c).
_____ (c)
7.
Add:
Required distance from top of image area to wall plate (c)
Height of image area (h)
Distance from floor to bottom of image area (f )
Height of wall plate plus cover
Required distance from top of image area to wall plate (c)
Height of image area (h)
Distance from floor to bottom of image area (f )
Height of wall plate plus cover
If the total exceeds the ceiling height, you will need to reduce the image size or
reduce the distance from the floor to the bottom of the image area.
reduce the distance from the floor to the bottom of the image area.
_____ (c)
_____ (h)
_____ (f )
+10 inches
_____ (h)
_____ (f )
+10 inches
_____ total