Emerson Dual Conversion Online UPS GXT3-6000RT208 Benutzerhandbuch

1. With the cover or distribution box removed, press the UPS and distribution box connectors 

together. Ensure that the connectors are fully seated.

2. Align the screw holes and press the power distribution box onto the UPS, making sure that the 

tabs at the bottom of the box fit into the slots on the UPS.

3. Attach the box to the UPS by installing screws into the two holes at the top of the box.
4. Tighten the screws.
5. Turn the output and input breakers On.
6. Start the UPS according to startup instructions.
7. Verify that the UPS lamp is illuminated.

Electrical connections are made through a removable power distribution box that attaches to the rear 

of the UPS.

• PD2-HDWR, PD2-HDWR-MBS, PD2-001, PD2-002, PD2-003, PD2-004, PD2-005 and PD2-006 

models fit the 5000 and 6000VA models of the Liebert

®

 GXT3

™

• PD2-L630 fits the GXT3-6000RTL630

™

• PD2-101, PD2-102, PD2-103, PD2-104, PD2-105 and PD2-106 models fit the 8000 and 10,000VA 

models of the Liebert GXT3

The installer must provide an upstream branch circuit breaker. The input circuit breaker on the dis-

tribution box and the output circuit breaker on the rear of the power distribution box disconnect all 

power between the main cabinet and the distribution box.
Models equipped with a manual bypass breaker pass bypass power directly to the bypass breaker 

from the input terminal block. The input circuit breaker on the distribution box does not disconnect 

power from the manual bypass breaker.

5000VA

D Type 30A Long Delay

6000VA
8000VA

D Type 60A Long Delay

10,000VA

Utility

Input

External

Branch CB

Output 

Distribution 

POD

Input

CB

Output

CB

Input 

Indicator

Output

 Indicator

Maintenance 

Bypass Breaker

UPS

Utility

Input

External

Branch CB

Optional

Output 

Distribution 

Plate

Input

CB

Output

CB

Input 

Indicator

Output
Indicator

Maintenance 

Bypass Breaker

UPS

Output 
Terminal 
Block