Electrolux EUROCLEAN W 345 B/M Benutzerhandbuch

 

Partially unscrew the two middle levers on the 
squeegee. Push the squeegee into the locating 
lugs as illustrated and fully tighten the levers.
(pull the lever up to disingage it and make its 
rotation free).

Push the coiled end of the squeegee hose fully 
home onto the tubular spigot in the centre of the 
squeegee.

Push the straight end of the squeegee hose onto 
the tank inlet pipe which protrudes through a slot 
in the lower rear panel.

 

This safety feature prevents the machine from 
moving if the machine is accidentally switched on 
with either forward or reverse function engaged 
(due to machine fault or an operator error).
When this happens the leds on display panel 
begin flashing.

 

This safety feature prevents the machine from 
moving if the machine is switched on with the the 
part of the electronic print card controlling drive 
power is in short circuit (in this case the machine 
would move immediately at full speed). This 
condition is signalled by the 3 voltmeter leds 
which start flashing.

 

This protection device of the electronic print card 
prevents damage to the card itself during 
prolonged use of the machine when one of its 
functions is overloaded. In this condition the 
machine automatically cuts off all its functions 
which are then only restored when temperature 
returns to normal value. This condition is signalled 
by the lighting up in sequence of the 3 voltmeter 
leds.

 

Micro switch to shut off all the functions when the 
tank is in the upright position.
(SEMKO APPROVAL)