Eclair ACL Gebrauchsanleitung
F I G . 6 . M O D U L E I N T E R C O N N E C T I O N S .
The embase unit forms the flat base of the camera
body. It consists of :-
body. It consists of :-
1. A 3/8 Whitworth mounting thread.
2. A Jaeger socket for power supply to thE
2. A Jaeger socket for power supply to thE
camera.
3. A camera start button.
4. Two cannon sockets for the motor power and
4. Two cannon sockets for the motor power and
ancillaries.
5. A stabilized 5V supply for the motor control
module.
6. The clapper light circult.(fig.4)
7. A Souriau socket for electrical connection
7. A Souriau socket for electrical connection
to the clapper lamp.
8. A clapper switch.
9. The bloop generator. (fig. 4)
9. The bloop generator. (fig. 4)
The camera start button activates the supply to the
motor and starts the camera. The marker switch has
three positions of which the centre position is the
neutral, i.e. no marker.
motor and starts the camera. The marker switch has
three positions of which the centre position is the
neutral, i.e. no marker.
3.1.1 THE BLOOP GENERATOR
The marker switch must be in an ON position and
the motor circuit energized for the bloop generator to
function. When the motor is running, the bloop
generator can be started as soon as the marker
switch is pushed into either of the two ON positions.
Alternatively, the marker switch can be left in either
of the ON positions and the bloop generator will start
as soon as the camera motor starts.
the motor circuit energized for the bloop generator to
function. When the motor is running, the bloop
generator can be started as soon as the marker
switch is pushed into either of the two ON positions.
Alternatively, the marker switch can be left in either
of the ON positions and the bloop generator will start
as soon as the camera motor starts.
11