Fusion Electronics Car Stereo System MS-AV700 Benutzerhandbuch

Problem

Solution

SiriusXM

When I press
the tuner source
button the
SiriusXM screen
is not displayed.

Ensure you have the MS700 Tuner region set to ‘USA’. Press Menu >
Settings > Tuner region > and select ‘USA’.
• Ensure the SiriusXM module is plugged into the MS700.
• Unplug the SiriusXM module and check the pins in the SiriusXM

plug are not damaged.

SiriusXM
message: ‘Check
Tuner’

• Ensure the SiriusXM module is plugged into the MS700.
• Ensure the SiriusXM cable has not been damaged.

SiriusXM
message: ‘Check
Antenna’

• Ensure the antenna is plugged into the SiriusXM Tuner module.
• Ensure the antenna is not damaged.
• Ensure the antenna cable has not been damaged

SiriusXM
message: ‘No
Signal’.

• Ensure the antenna is not damaged.
• Ensure the antenna has a clear view of the sky and is not obscured.
• Ensure the antenna cable has not been damaged

What is the best
way to prevent
corrosion on
my 700 Series
chrome finish?

As with all products with a chrome finish exposed to the harsh marine
environment, a little care will help to preserve the finish and prevent cor-
rosion. FUSION recommends that you clean any salt water and/or salt
residue from the front panel with a damp cloth soaked in fresh water.

APPENDICES

TROUBLESHOOTING

Problem

Solution

General

The unit does
not respond to
key presses.

• Reset the unit by pressing the Reset button inside the control panel door.

SiriusXM
message:
‘Channel xx Not
Available’

A SiriusXM message informing you that the current channel is unavailable.
Possible causes are SiriusXM has removed the channel or your SiriusXM
subscription has changed.
• Contact SiriusXM to update your subscription.
• Online: Go to www.siriusxm.com/subscriptions
• Phone: Call 1-866-635-2349