Fujitsu CONNECT2AIR AP-600RP-USB Benutzerhandbuch

CONNECT2AIR™ WLAN AP-600RP-USB

 

 

Page 13 / 62

  

5.2.1 Network Settings 
Regardless of whether you are using a wireless or wired device to connect to your Ac-
cessPoint, all the following steps must be followed for your network adapter: 
 

1.  From the Windows Start button on your PC, choose Settings and select the Control 

Panel item. 

 

 

Step 2 

Step 3 

Step 4 

 

2.  Double click the Network Connections icon (network card that is connected to the 

AccessPoint).  

3.  Select the TCP/IP adapter associated with your network card on the Configuration 

tab in the Network window. 

4.  Click the Properties button. Click the IP Address tab. Select Obtain an IP Address 

automatically. 

5.  Click the Gateway tab. Clear and remove all of the gateway settings. Click the OK 

button. 

 
L

All the necessary settings, including the IP address and subnet mask will be provided 
from the AP. 

 

5.2.2 Configuration of your Wireless Client 
To open a wireless connection to your AccessPoint, it is necessary to configure the wire-
less client device in your PC: 
 

• 

Network mode:    

Infrastructure 

• 

Network name (SSID): CONNECT2AIR or ANY  

• 

Security: 

 

  disabled 

• 

Channel (frequency):   automatic 

• 

IP address: 

 

obtain automatically 

 
These parameters can be entered in the user interface of your network card. Please refer 
to the documentation delivered with your device. 
 

L

Recent client configuration utilities detect the wireless settings automatically.