Fujitsu CONNECT2AIR AP-600RP-USB Benutzerhandbuch

CONNECT2AIR™ WLAN AP-600RP-USB

Page 17 / 62

6.2 AP-600RP-USB with ADSL Router (advanced)

( 1 ) ADSL Router

( 2 ) AP-600RP-USB

( 3 ) Notebook

WAN: PPPoE over ADSL
LAN:

static IP: 192.168.1.1

DHCP on: 192.168.1.10 - 90
GW:

192.168.1.1

DNS:

auto

WAN: dynamic IP address
LAN:

static IP: 192.168.4.254

DHCP on:

192.168.4.10 - 90

GW:

192.168.4.254

DNS:

auto

Routing: on (cable from Router

connected to the WAN

interface)
SSID: CONNECT2AIR

TCP/IP: get IP and DNS addresses
automatically
SSID: CONNECT2AIR
Data
rate: auto

Connecting the devices to the AP-600RP-USB:

Installation Note

Both the AccessPoint as well as the ADSL Router have routing capabilities. This case de-
scribes using both devices in the router mode in order to have the full feature set of the
AccessPoint active, like the Firewall, NAT or the packet forwarding service.
Important: The IP segment of the ADSL Router has to be different from the one of the
AccessPoint, otherwise the APs Router will not work properly. Due to production process,
the third IP segment of the AccessPoint must be different to 192.168.2.X, as the default
WAN setting for “static IP address” is set to 192.168.2.1 .

ADSL Router:
- DHCP Server (on or off)
- managing the PPPoE session

AP-600RP-USB:
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active