Fujitsu CONNECT2AIR AP-600RP-USB Benutzerhandbuch

Seite von 63
CONNECT2AIR™ WLAN AP-600RP-USB
 
 
Page 43 / 62
  
 
 
Enter the user name and password you configured for your DDNS provider. 
If you use a wildcard, all host names will be diverted to the main host. For example, 
First.mycam.dyndns.org or Second.mycam.dyndns.org would be diverted to the host 
named mycam.dyndns.org. 
 
3: 
Release of the route in the virtual server 
 
In the WEBcam example (preconfigured to the IP address 192.168.1.10) the vendor notes 
that the ports 80 and 7070 are required for communication and control (motor zoom). 
These must be added to the virtual server using Add. The WEBcam can only be accessed 
over the Internet in this way. 
 
As a result, all IP packets with port 80 or 7070 at the WAN interface of the AccessPoint are 
diverted to the internal IP address 192.168.1.10 (WEBcam). 
 
 
 
L
 
The WEBcam can always dynamically obtain an IP address instead of a fixed 
one. However, since there is a direct link between a port and a specific IP 
address in the virtual router, the service only functions while the WEBcam 
has no other address. In this case, it is recommendable to assign the MAC 
address of the WEBcam permanently to an IP address 
Æ
 see DHCP / Ad-
dress Reservation.