Fuji Bikes FRENIC 5000G11S/P11S Benutzerhandbuch

 

1-2

1-3  Handling the Product 
(1) Removing the surface cover 

For the inverter of 30HP or less, loosen the mounting screws of the surface cover, then remove the 
cover by pulling the top (see Figure 1.3.1). 

 

Fig. 1-3-1 Removing the surface cover (for inverter of 30HP or less) 

For the inverter of 40HP or more, remove the six mounting screws of the surface cover, then 
remove the surface cover. 

 

Fig. 1-3-2 Removing the surface cover (for inverter of 40HP or more) 

(2) Removing the keypad panel 

After removing the surface cover as explained in (1), loosen the mounting screws of the keypad 
panel and remove as shown in Figure 1.3.3. 

 

Fig. 1-3-3 Removing the keypad panel 

Loosen the mounting screws of the keypad panel and remove using the finger holds on the 
keypad panel case. 

 

Fig. 1-3-4 Removing the keypad panel (for inverter of 40HP or more)