Fostex PD606 Benutzerhandbuch
204
Location Recorder Model PD606
Chapter 8: MENU mode/DISK UTILITY menu
Using the "Format" menu item, you can reformat a DVD-RAM disk or a partition of the internal
hard disk drive in the UDF format.
For details about how to format an unformatted DVD-RAM disk, see "Initial format of a DVD-
RAM disk" on page 34.
hard disk drive in the UDF format.
For details about how to format an unformatted DVD-RAM disk, see "Initial format of a DVD-
RAM disk" on page 34.
On this screen, you can make setting for the following items regarding formatting.
Drive
Selects a medium to be formatted.
You can select from among "DVD-RAM" (a DVD-RAM set to the standard fitted
DVD-RAM drive) and "PT01HD" through "PT16HD" (partitions of the internal hard
disk drive). If the optional hard disk drive is not installed, "DVD-RAM" is the only
option.
You can select from among "DVD-RAM" (a DVD-RAM set to the standard fitted
DVD-RAM drive) and "PT01HD" through "PT16HD" (partitions of the internal hard
disk drive). If the optional hard disk drive is not installed, "DVD-RAM" is the only
option.
Reel No
Sets the reel number (volume label) of the selected medium. By default, the
following numbers are set as the reel numbers.
following numbers are set as the reel numbers.
DVD-RAM
->
S001
Partition
->
PT01HD: S002, PT02HD: S003 .... PT16HD: S017
Format Mode
Physical Format
Selects the format mode between "Normal" and "DDR".
You are going to perform Dual Drive Recording to a hard disk partition and a
DVD-RAM disk, select "DDR".
You are going to perform Dual Drive Recording to a hard disk partition and a
DVD-RAM disk, select "DDR".
Selects whether physical-formatting the DVD-RAM disk (or hard disk partition).
Formatting a disk (or a hard disk partition) [Format]
3)
Use the [MENU] dial to select the "Format" menu item and press the [ENTER/YES] key.
The display now shows "Format" screen.
1)
While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by
the [ENTER/YES] key.
the [ENTER/YES] key.
The unit enters the MENU mode and the MENU list screen is shown.
2)
Use the [MENU] dial to select the “DISK UTILITY” menu item and press the [ENTER/YES] key.
The display now shows the DISK UTILITY menu screen.