Fostex PD606 Benutzerhandbuch
216
Location Recorder Model PD606
Chapter 9: Specifications
Inputs/outputs
* 0dBu = 0.775Vrms, 0dBV = 1Vrms, Reference level: -20dBFS
ANALOG INPUT (CH1 ~ 6)
Connectors
: XLR-3-31 type (balanced, pin 2: hot)
LINE
Input impedance
: More than 10k
Ω
Input level
: +4dBu ~ -32dBu
Maximum input level
: +24dBu
MIC
Input impedance
: More than 2k
Ω
Input level
: -34dBu ~ -70dBu
Maximum input level
: -14dBu
ANALOG OUTPUT (TRK1 ~ 6)
Connectors
: XLR-3-32 type (balanced, pin 2: hot)
Output load impedance : More than 10k
Ω
Reference output level
: +4dBu
Maximum output level
: +24dBu
STEREO BUS OUT
Connector
: XLR-5-32 5PIN type (balanced)
Output load impedance : More than 10k
Ω
Reference output level
: +4dBu/-10dBu/-60dBu (The reference output
level is selected in the SYS SETUP menu of the
MENU mode.)
level is selected in the SYS SETUP menu of the
MENU mode.)
Maximum output level
: +24dBu
PHONES
Connector
: 6mm dia stereo phone jack
Applicable load impedance
: More than 32
Ω
Maximum output level
: 200mW (at 32
Ω
)
DIGITAL IN/OUT
Connector
: D-sub 25pin
Format
Input
: IEC60958 Part2 (S/P DIF) or IEC 60958 Part3
(AES/EBU), auto selection
(AES/EBU), auto selection
Output
: IEC60958 Part2 (S/P DIF) or IEC 60958 Part3
(AES/EBU), The format of an output signal is
selected in the SYS SETUP menu of the MENU
mode.
(AES/EBU), The format of an output signal is
selected in the SYS SETUP menu of the MENU
mode.
TIME CODE IN
Connector
: XLR-3-31 type (balanced, pin 2: hot)
Format
: SMPTE/EBU
Input impedance
: More than 20k
Ω
Reference input level
: 2V p-p
Minimum input level
: 0.25V p-p
TIME CODE OUT
Connector
: XLR-3-32 type (balanced, pin 2: hot)
Format
: SMPTE/EBU
Output impedance
: Less than 1k
Ω
Reference output level
: 2V p-p
Output load impedance : More than 600
Ω
VIDEO/WORD IN
Connector
: BNC type (auto software selection)
Reference input level
: TTL level (with 75
Ω
termination switch)
WORD OUT
Connector
: BNC type
Output level
: TTL level
PARALLEL REMOTE
Connector
: MINI DIN 8pin (female)
9P-REMOTE
Connector
: D-sub 9pin
USB (KYBD)
Connector
: USB Series A Receptacle
USB (PC)
Connector
: USB Series B Receptacle
USB (HOST)
Connector
: USB Series A Receptacle