Compex Systems 802.11N Benutzerhandbuch

Click                        at the bottom of the Status page to view client connection statistics. 

 

MAC Address: displays the MAC address of the current active WLAN card.   

 displays the received wireless signal level of opposite connected device. 

TX Rate and RX Rate: displays the current 802.11 data transmission (TX) and data reception 

 

(RX) rate while operating in Station mode. Typically, the higher the signal, the higher the 

 

data rate and consequently the higher the data throughput.   

20MHz – is the standard channel spectrum width (selected by default).   

40MHz – the widest channel spectrum width required to connect to an 802.11a network which   

  supports 

Static 

Turbo 

feature 

 

 

 

Bytes transmitted/received value represents the total amount of data (in bytes) transmitted 

 

and received during the connection;   

WLAN Local AP Errors: section displays the counters of 802.11 specific errors which were 

 

registered on wireless interface:   

Rx invalid NWID value represents the number of packets received with a different NWID or 

 

ESSID - packets which were destined for another access point. It can help to detect 

 

configuration problems or identify the adjacent wireless network existence on the same 

 frequency.