Compex Systems WPE53G Benutzerhandbuch

 

Page 79 

(Available in Wireless Routing Client and Gateway modes) 

 

The access point allows you to add a static routing entry into its routing 

table to re-route IP packets to another access point. This is useful if your 

network has more than one access point. 

 

 

 

You do NOT need to set any routing information if you are simply 
configuring the access point for broadband Internet sharing. The 
wrong routing configuration might cause the access point to 
function improperly. 

 

In this network, the main office of subnet 192.168.168.0 contains two 

routers: the office is connected to the Internet via the access point 

(192.168.168.1) and to the remote office via 192.168.168.254 The 

remote office resides on subnet 192.168.100.0 

 

You can add a static routing entry into the access point routing table 

so that IP packets from the clients in the main office with a destination 

IP address of 192.168.100.X where X is any number from 2 to 254 will be 

re-routed to the router, which acts as the gateway to that subnet.