Fortinet FortiGate 4000 Benutzerhandbuch
![Fortinet](https://files.manualsbrain.com/attachments/1b5d8cfe7b7256038af0fc8f11ea0645b1979a44/common/fit/150/50/6ff6e359203158e39987669188ec093742c96b81ec0664dff6b23b5278e2/brand_logo.png)
PPTP and L2TP VPN
Configuring L2TP
FortiGate-4000 Installation and Configuration Guide
265
Configuring L2TP
Some implementations of L2TP support elements of IPSec. These elements must be
disabled when L2TP is used with a FortiGate unit.
disabled when L2TP is used with a FortiGate unit.
This section describes:
•
•
•
Configuring the FortiGate unit as an L2TP gateway
Use the following procedures to configure the FortiGate unit as an L2TP gateway:
To add users and user groups
Add a user for each L2TP client.
1
Go to User > Local.
2
Add and configure L2TP users.
See
See
3
Go to User > User Group.
4
Add and configure L2TP user groups.
See
See
To enable L2TP and specify an address range
1
Go to VPN > L2TP > L2TP Range.
2
Select Enable L2TP.
3
Enter the Starting IP and the Ending IP for the L2TP address range.
4
Select the User Group that you added in
.
5
Select Apply to enable L2TP through the FortiGate unit.
Figure 78: Sample L2TP address range configuration