Clarion BLT370 Benutzerhandbuch
18
BLT370
Turning on/off multiple re-connection mode
This function allows user to switch on or off the multiple re-connection mode.
ON: Multiple attempts are made to auto re-connect with the last paired mobile
phone (HSP/HFP) when Transceiver is powered up.
OFF: Only 1 attempt is made to auto re-connect with the last paired mobile
OFF: Only 1 attempt is made to auto re-connect with the last paired mobile
phone (HSP/HFP) when Transceiver is powered up.
1. When the Transceiver is powered on (no device connected), press and hold
the [VOL +] and [VOL -] buttons simultaneously for 2 seconds or longer to
toggle multiple re-connection mode on or off.
2. Auto connection will be observed in the next powered up of the Transceiver
2. Auto connection will be observed in the next powered up of the Transceiver
based on the multiple re-connection mode setting.
Notes:
• Factory default setting is ON.
• Please refer to chapter “Understanding the Transceiver Unit Indicators” on
page 16 for more information about the LED status.
• The multiple re-connection attempts will be terminated if the Transmitter (DGL370)
is connected.
• Resetting the Transceiver will not change the multiple re-connection mode to
original setting.
5. OPERATIONS FOR
BLUETOOTH
®
AUDIO/MOBILE-
PHONE TRANSCEIVER UNIT
1EN_OM_Receiver BLT370.indd 18
8/15/07 3:10:40 PM