Chimera Versi Bracket 2801 Merkblatt

Seite von 1
#2801 Versi Bracket
Instruction Sheet
Assemble the appropriate mounting plate to the front of the 
bracket upright with the black knurled adjustment lock knob.  
Two mounts are supplied.  One for mounting a Polycabonate 
4-pole Speed Ring (with a thumb screw) and one for mounting 
the OctaPlus 8-pole Speed Ring (using the two supplied Phillips 
screws).  
Mount the Accessory Shoe to the Versi Bracket with thumb 
screws.  Multiple mounting holes on the bracket base allow po-
sitioning your flash at the correct distance from the Speed Ring. 
Use the extra thumb screw under the accessory shoe to add 1/2” 
to raise flash position, if needed.  
Attach your flash unit onto the Accessory Shoe and adjust the 
flash height to center the reflector in the Speed Ring opening.  
The bracket off set allows the use of Pocket Wizard’s Flex TT5 
while centering the flash.  You are now ready to attach your 
Lightbank to the Speed Ring.   
Options:
You can use the #2688 Slave Adapter (optional) to mount 
• 
other radio receivers.
The thumb screw has a threaded bottom hole to accept op-
• 
tional 1/4-20 stand adapter studs for placing on a light stand.  
Ideally suited for the Mini and Maxi, as well as the Octa 2 
• 
Beauty Dish.
See the Video Library at www.chimeralighting.com/video-
• 
library for more information.
CHIMERA  1812 Valtec Lane, Boulder, CO 80301
   
303-444-8000   FAX 303-444-8303    888-444-1812     
salesinfo@chimeralighting.com    www.chimeralighting.com
     Includes:
Versi Bracket with off set base
• 
Accessory Shoe 
• 
3 - Threaded thumb screws
• 
Mount for Polycarbonate 
• 
Speed Ring
Mount for Octa Speed Ring & 
• 
2- screws
    4-pole Poly 
mount           
On-Camera Flash Bracket for Your Polycarbonate 
and Octa PLUS Speed Rings
8-pole Octa 
mount
Height Adjustment
Lock Knob
Pocket Wizard 
Flex TT5
Octa PLUS
Set Up
PN 28019800
#2688