Castelle Office Direct OfficeDirect Storage Server Benutzerhandbuch

38

S

TORAGE

 S

ERVER

 U

SER

’

S

 G

UIDE

This can happen if the amount of free disk space is not sufficient to spool 
(queue) the print job. Storage Usage can be checked using the Status> 
Storage screen on the Administrator interface. If this is the problem, you 
must delete some print jobs:

1.

Using the Administrator interface, select Status>Printer.

2.

Use the Delete current job to delete the current print job, or 
Delete all jobs to delete all print jobs.

These options can also be used if for some reason a print job or jobs does not 
print correctly.

Check the following:

1.

The Storage Server is properly installed, LAN connections are 
OK, and it is powered ON.

2.

If your LAN has a router, ensure that your Mac and the Storage 
Server Device are on the same network segment.

3.

If any PC or device on the LAN is already using the Storage 
Server's default IP Address of 192.168.0.2, that PC or device 
must be turned OFF until the Storage Server is allocated a new 
IP Address.

4.

Ensure that your Mac is using an IP Address within the range 
192.168.0.3 to 192.168.0.254 and thus compatible with the 
Storage Server's default IP Address of 192.168.0.2. Also, the 
Subnet Mask should be 255.255.255.0.
This can be checked using Apple>Control Panel>TCP/IP.

There are two things to try: