Canon Microfilm Scanner 300 Benutzeranleitung

19

■ BEFORE YOU BEGIN ... ■

Connection of the SCSI cable to the main unit and the specifica-
tion of the SCSI ID and other setting should be done by the super-
vising service personnel. To change the SCSI ID or any other
connection settings, please contact your service provider.

At shipment, the SCSI ID for the scanner is set to 2
and the terminator setting is OFF. To change the SCSI
ID or any other connection settings, please contact your
service provider.

Multiple (up to 7) scanners can be connected to a computer in a
daisy chain.

• Each of the connected scanners is identified with a

SCSI ID.

• The multiple scanner connection is valid only when

CapturePerfect software is started up in the Reader/
Printer mode. (

➞P.28 “About the Reader/Printer

Mode”)

• All settings and operation of the scanner most be

performed through the operation panel on the main
body.

The entire length of the SCSI cable must be within 6m.

scanners (when 3 units are connected)

computer

Multiple Scanner Connection