Avocent Cyclades-PR4000 Benutzerhandbuch

The 

super

 user has access to all menus.  The 

usr

  user is shown a menu, upon sucessful login, with the items

chosen in the user’s profile.  The 

pppauto

 user is connected directly to the user via PPP.  No menu appears.  The

auto

 user is connected via telnet directly to the host specified as host 1 in the user profile.  If an 

automatic login

name

 is indicated when the auto user is configured, the user is logged in to the remote host directly (though a

password may be necessary, depending on the remote host configuration).

IP Accounting is used to count the total number of packets allowed (or not) to pass through an interface.  Statistics
are given for packets that meet the criterions defined in a rule.  (Traffic Rules are not supported).  To see all
packets, a special rule list permitting everything can be defined.  Rules are described in chapter 14.

Two versions of the IP account table are available for viewing.  The result of INFO =>SHOW ACCOUNT TABLE
=>SUMMARY is shown below for four filter rules.

IP Accounting Table

Interface

Direction

Filter List

Rule

Bytes

Packets

Ethernet

Outgoing

generic

0

24876

3072

Ethernet

Incoming

generic

0

49254

3358

slot 3

Outgoing

swan3out

17

21362

3223

slot 3

Incoming

swan3in

15

32563

3131

Detailed information can be accessed via SNMP.

To use IP Accounting, two parameters must be set. When a rule is created, the parameter CONFIG =>RULES
LIST =>IP =>CONFIGURE RULES =>ADD RULE =>ALLOW ACCOUNT PROCESS must be 

Yes

.  Additionally,

when applying a rule to an interface, the parameter CONFIG =>INTERFACE =>ETHERNET =>NETWORK
PROTOCOL =>IP =>DETAILED INCOMING /OUTGOING IP ACCOUNTING must also be Enabled.