AVerMedia Technologies AverEPack300 Benutzerhandbuch

 AVerMedia

®

 AVerEPack300 User’s Manual 

 

26

  The time value settings in minutes appear as follows:  0~10, 15, 20, 30, 

40, 50, 60, 90 and 120. 

4. After selecting a time value, press the MENU button to close the menu.

   

To View the Countdown Screen Display: 

1. To display the previously set time value, 

press the TIMER button once. The format is 
in hours:minutes:seconds. 

automatically converts your settings to the 
above mentioned format. 

2. To start the countdown, press the TIMER button the second time. 

3. You can toggle the countdown screen display on and off by pressing the 

TIMER button. 

Reference Function 

This function allows you to store a slide into the memory and display it 

anytime whenever you press the REFERENCE button. 

Storing the Slide in the Memory:  

1. 

If you are in 16-slide preview mode, select the slide you want to 
store in the memory. (The designated number of the selected slide 
will be highlighted in yellow and blinks.) You may also store the 
fully viewed slide or single slide view in the memory. 

2. Press 

REFERENCE button until the OK sign appear to store the 

selected slide in the memory. 

Note: You can only store one slide at a time. If you restore another slide, 

this will replace the prevoiusly stored slide to the newly stored 
slide. 

Viewing the Stored Slide in the Memory: 

After you have stored a slide in the memory, you can view the stored slide 
anytime by pressing the REFERENCE button. 

To continue viewing the previous slide before it was interrupted, press the 
REFERENCE button. 

0:00:30