Avaya S8710 Benutzerhandbuch

Configuring the media server

: Connect the AC power cord to media server 1 and to UPS 1 to power it up.

: Connect the AC power cord to media server 1 and to UPS 1. Press the Power button on the 

front to power it up.

You must place the CD in the drive immediately.

Connect the laptop to the services port (port 2 [Eth1]) on the back of the media server using a 
crossconnect cable.

Place the CD with Avaya Communication Manager in the CD-ROM drive on the media server.

Wait at least 3 minutes after powering up before starting a Telnet session to access the information 
on the CD.

Use a telnet session to access the information on the CD.

The Microsoft Telnet application may be set to send a carriage return (CR) and line feed (LF) each time 
you press Enter. The installation program sees this as 2 key presses. If running Windows 2000/XP, you 
need to correct this before you copy the Remaster Program to the hard drive.

Click Start > Run to open the Run dialog box.

Type 

and press Enter to open a Microsoft Telnet session.

Type 

and press Enter

to see the current settings. If message says

Sending only CR

then close the dialog box.

If message says 

Sending both CR & LF

then continue with step 4.

Type 

 and press Enter.

Type 

and press Enter

to verify that the settings changed. The message says

Sending only CR

Close the dialog box.