Avaya S8710 Benutzerhandbuch

3 Translating the IPSIs

Inputing translations

Installing and Configuring the Avaya S8700 or S8710 Media Server

June 2004

Inputing translations

Contact the installation personnel responsible for translation input to download the translations.

Type

save translations

and press Enter to save the translations to the hard drive.

If the translations are not ready, you may continue with the process, entering minimal translations to
verify connectivity to the port networks.

Resetting the media server

NOTE:

Do not reset the media server if no translations were input or if they were not entered in
bulk.

Type

reset system 4

and press Enter to have the software read the copied translations.

Adding media gateways

NOTE:

Do this procedure only if the translations were not input earlier.

NOTE:

A cabinet is defined as up to 5 G650 Media Gateways mounted in a rack and TDM-
connected or 1 MCC1 Media Gateway.

Type

add cabinet number

(1 through 64) and press Enter for each stack of G650 Media

Gateways or MCC1 Media Gateway controlled by one TN2312BP IPSI circuit pack.

Fill in the location and carrier type for media gateways 2(B), 3(C), 4(D), and 5(E).

add cabinet 1 Page 1 of 1

CABINET

CABINET DESCRIPTION
Cabinet: 9
Cabinet Layout: G650-rack-mount-stack
Cabinet Type: expansion-portnetwork

Location: 1

Rack: Room: Floor: Building:

CARRIER DESCRIPTION
Carrier Carrier Type Number

E not-used PN 09
D not-used PN 09
C not-used PN 09
B G650-port PN 09
A G650-port PN 09