Avaya S8710 Benutzerhandbuch
4 Connecting to the IPSIs
Verifying license status
56
Installing and Configuring the Avaya S8700 or S8710 Media Server
June 2004
1
Type
change system-parameters ipserver-interface
and press Enter.
2
Make sure the
IPSI Control of Port Networks:
field is set to enabled.
3
Press Enter to effect the changes.
Verifying license status
1
Under Security, click License File and verify that the license mode is now normal.
Reusing a TN2312AP/BP circuit pack
On occasion a customer may want to reuse a TN2312AP or TN2312BP circuit pack that was previously
programmed for DHCP or static addressing. You must erase the existing programming before
reprogramming it. Failure to do this may result in serious network problems.
programmed for DHCP or static addressing. You must erase the existing programming before
reprogramming it. Failure to do this may result in serious network problems.
For information on erasing the programming, go to the Maintenance Procedures for Avaya
Communication Manager 2.1, Media Gateways and Servers (03-300192).
Communication Manager 2.1, Media Gateways and Servers (03-300192).
change system-parameters ipserver-interface Page 1 of 1
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
SERVER INFORMATION
IPSI Host Name Prefix:
Primary Control Subnet Address: 172. 22. 0. 0
Secondary Control Subnet Address: . . .
Primary Control Subnet Address: 172. 22. 0. 0
Secondary Control Subnet Address: . . .
OPTIONS
Switch Identifier: A
IPSI Control of Port Networks: enabled
IPSI Control of Port Networks: enabled