Avaya S8710 Benutzerhandbuch

LED indicators

 

You can test some of the LEDs on the front of the media server through the Maintenance Web Interface. 
This makes sure that the Active/Standby and U2 LEDs (on the front of the media server) and the transmit 
LED on the DAJ1 duplication memory card (on the back of the media server) are controllable and not 
burned out and that the media server is not hung. 

The U2 LED is controlled by the S8700 Media Server but does not have an assigned 
function.

The other LEDs are exclusively under hardware control so will not flash during the test. See the OEM 
user documentation that comes with the media server for information on those LEDs.

During the 1-minute test, the Active/Standby and U2 LEDs alternate from being on (amber) for 1 second 
and off for 1 second off. The transmit LED cycles from red (on 1 second, off 1 second) to green (on 
1 second, off 1 second).

Power

Configuration fault

Hard drive activity

Network activity (CNA)

Service—configuration health

Active or standby mode indicator

U2 (not defined)

4 NIC ports (the numbers indicate their 
assigned Ethernet ports)

LEDs for the NIC ports (some NICs may 
not have LEDs)

LEDs for fiber optic duplication 
connectivity

Status LED (not used)

1

SERVICE

U2

STANDBY

ACTIVE

5

5

4

4

3

3

2

2

DA
I -

 1

DUP

MEM

OR

Y

LINE

RECEIVE

TRANS

LINK

ST
A

T

AVA
YA

scdlled KLC 030502