Avaya 3456 UC Client - Communication Server 1000 Betriebsanweisung
- 6 -
Welcome
Avaya 3456 UC Client
User Guide
NN43080-100 02.01 Standard
7.5 November
2010
Requirements
The following basic hardware specification is required to operate the Avaya
3456 UC Client:
3456 UC Client:
•
Intel Pentium III 1.3 GHz or equivalent
•
Windows 2000/XP/Vista
•
512 MB RAM
•
50 MB hard disk space
•
16 Bit, full-duplex sound card
•
IP connection
Depending on the configuration of your workstation or laptop, you may also
need to obtain a microphone and speakers, or a USB headset with
microphone. If it is your intention to utilize the softphone video call/
conferencing features, you will also need a webcam.
need to obtain a microphone and speakers, or a USB headset with
microphone. If it is your intention to utilize the softphone video call/
conferencing features, you will also need a webcam.
Online help
For detailed information about specific client features, see the help
documentation provided with Avaya 3456 UC Client. To access help, in the
Avaya 3456 UC Client, click Actions and then click Help.
documentation provided with Avaya 3456 UC Client. To access help, in the
Avaya 3456 UC Client, click Actions and then click Help.
Avaya preferred configurations
Following list contains preferred configurations for Avaya 3456 UC Client
•
Disable the provisioning server on the phone, On the phone, navigate to
Preferences > Advanced > No login server available.
Preferences > Advanced > No login server available.
•
Configure only the G711 and G729 voice codecs for the Avaya 3456 UC
Client.
Client.
•
Ensure that the fixed single port is defined. Navigate to Account Settings
> Topology > Port Range to set the port.
> Topology > Port Range to set the port.
•
Ensure the registration refresh time is set to five minutes. This keeps the
registration timer short enough to recover quickly in case of network
failure.
registration timer short enough to recover quickly in case of network
failure.
•
To make the Avaya 3456 UC Client DTMF work with the Media Application
Server (MAS), ensure that SIP > Account > Topology > Enable ICE is not
selected.
Server (MAS), ensure that SIP > Account > Topology > Enable ICE is not
selected.
Related publications
For more information, see the following related publications:
•
Avaya CS 1000E suite of documentation