Avalon Acoustics Sentinel Benutzerhandbuch

Seite von 67
47
It  is  not  necessary  to  acoustically  treat  the  entire  room  to  achieve  good
results.  Strategic  treatment  of  specific  locations  can  realize  considerable
benefits. Remember that when sound waves reflect from a flat surface, the
angle of reflection is equal to the angle of incidence, just as a mirror reflects
light  waves.  Therefore,  the  most  important  location  for  sound  absorbing
material is the point where the sound waves reflect to the listener (see Figure
9.2).
Early reflections will tend to diminish the sound stage in the direction of the
reflections,  i.e.  early  reflections  from  the  side  walls  tend  to  reduce
sound-stage  width,  while  early  reflections  from  the  back  wall  will  reduce
image  depth.  We  have  found  that  a  strong  sense  of  depth  enhances  the
feeling of involvement when listening, due to the three-dimensional solidity of
images. Therefore, it is more important to have a greater distance from the
speakers  to  the  rear  wall  than  to  the  sides  walls.  Typically,  this  is  easier  to
achieve if the speakers are placed along the short wall of the listening room.
Reflected Sound
Direct Sound
Angle X
Angle Y
Figure  9.2   The  sound  is  reflected  at  the  same  angle  that  it  struck  the
surface;  i.e.,  Angle  X  =  Angle  Y.  Since  light  waves  obey  this  same  rule,  a
mirror  can  be  used  to  find  the  point  which  can  be  acoustically  damped  to
avoid early reflections.