Autodesk HP Workstation xw9400 Benutzerhandbuch

   

23

Setting Up Video Hardware

You use the video components to set up video I/O and a broadcast monitor. The only video 
hardware you must provide are a sync generator, a VTR, and a HD/SDI broadcast monitor. The 
following components are included in your hardware shipment. 

The AJA OEM-2K board and breakout box 

provides video I/O, audio, and VTR control. The AJA breakout box connects to the AJA OEM-
2K board and handles SD (NTSC, PAL), and HD at a depth of 8 and 10 bits.

The NVIDIA® Quadro® FX 5500G is the 

graphics board for 2K/DI configurations, and provides output to your computer and broadcast 
monitor. 

The LCD graphics monitor features a wide screen that makes a 16:9 

aspect ratio possible for HD projects. With this monitor, the application runs at a maximum 
resolution of 1920x1200. 

The DVI-Ramp

2

 connects the Linux workstation to two display 

devices: a high-resolution computer monitor and a broadcast monitor. This allows the 
application user interface to be displayed on a standard, non-interlaced, high-resolution 
computer monitor, while the portion of the user interface containing video content (preview 
window) is extracted and output on a broadcast video monitor. The DVI-Ramp

2

 can output 

either a standard definition serial digital video signal or a high definition serial digital video 
signal. It provides a real-time preview to both the graphics display and broadcast monitor.