ATI Technologies Preseeder 365 Benutzerhandbuch

1. Position the machine on a trailer or other 

vehicle (See Figure 27).

2. Stop the engine.

3. Lower the Preseeder until the rotor rests

on the deck.

4. Use the front tie down loops on the bot-

tom of the wheel frame to secure the front
of the machine.

5. Secure the rear of the tractor using the tie 

down loops as shown

1. 

Turn off Tractor engine and lower rotor to 

ground.

2. 

Remove Main Drive Belt Shield by

removing 2(two) mounting bolts

(See

Figure 30 on Page 18 ).

3. 

Move Drive Belt Release Handle to the 

disengaged position, and remove belt from 
Drive Pulley (D) on engine (See Figures
31 & 32 on Page 18).

4. 

Remove 2(two) 1/2 inch attaching bolts 

(See Figure 28).

16