Artesian Spas Grand Bahama Benutzerhandbuch
MAINTAINING YOUR SPA cont...
REMOVING, INSTALLING AND CLEANING FILTERS
These are the steps needed to successfully replace your filters.You
should replace your disposable spa filters and clean your nondispos-
able filters every four months.
1) Turn off all power to your spa and remove
the filter lid by lifting it out towards you.
2) Turn the filter counterclockwise and
remove it from the filter well.
3) Dispose of the used filter.
5) To replace, set screen back into its place
and turn clockwise to fasten. DO NOT
over-tighten.
6) Place the new filter into position and turn
clockwise to fasten. DO NOT over-tighten.
7) We recomend the use of a quality filter soak product.
Please contact your dealer to purchase all all your spa care
products.
WARNING: Power to your spa must be turned off prior to remov-
ing your filters. The suction at the filter is extremely strong and
can cause injury if there is no filter. NEVER run your spa without
the filters properly installed. Injury to person and damage to the
equipment can occur. Any damage to equipment due to this cir-
cumstance will not be covered under warranty.
61