Aquapro Fish Feeders ADF-150DX Benutzerhandbuch

1 

Verify the contents of the package against 
the included parts list. If you are missing any 

parts from the list, please contact BA Products    
immediately at the toll-free number provided.

2

  First, remove the lid and two hopper assembly  
  pieces and then place the three pieces on the 

ground.

3

  Second, remove both the power control unit    
  box and the leg/bolt kit box.

4

  Open the leg kit box and locate the bolt kit and  
  silicone rubber gasket.

5

  Locate the funneled piece of the hopper  
  assembly and the silicone gasket. Lay the 

funneled side of the hopper piece on the ground. 

Find the recess in the flange on the top side and 
install the silicone gasket by laying it into the recess 
and pressing firmly to keep it in place (Illustration A).

6

  Next, locate the bolt kit and then place the  
  top portion of the hopper onto the funneled 

piece. Align the bolt holes on the flanges so you 
can see directly through them. Insert the 1⁄4” x 1” 
Bolt and the 1⁄4” Washer into each hole with the 
head on top and the thread facing downward. Next, 
take the 1⁄4” Nylon Lock Nut and securely tighten to 
each bolt (Illustration B).

(Illustration A)

PAge 4

(Illustration B)