Apple Computer Work Light iDL48 Benutzerhandbuch

Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC adaptor into the wall 
outlet. 

The iDL48 has an internal rechargeable Lithium-ion battery which should last the life of the unit. Charge the battery fully 
for first time use. Please allow at least 6 hours to fully charge the unit for first time use.
1. Make sure the AC adaptor is properly connected  to the unit and plugged into a working power source.
2. The internal battery will charge. While the battery is charging, the blue LED battery indicator lights will cycle to the right.
3. When the battery is fully charged, all 4 battery indicators will remain lit while the unit is powered on. As the battery runs

down, the lights will go out (see below). 

Fully charged           75-50% charge     50-25% charge      25-5% charge

When there is no battery indicator light, the battery is dead and needs to be charged. NOTE: Even if the battery is dead, 
the unit will still operate while connected to AC power.

1. The unit must be connected to an AC power source to charge your iPad, iPhone or iPod, whether docked in the

Lightning connecter or connected to the USB port on the back of the unit. The unit will not charge these devices
when operating on the internal battery.

2. Open the stand and gently dock your iPhone 5, iPad mini, iPad 4th generation and iPod touch 5th generation. Note

that older devices cannot dock to the unit, but must be connected to the USB port using the sync cable that came with
it.

Your device will begin charging and while docked or connected via USB will continue until fully charged.

Press and release the      Power/Mode Button on the unit at any time as needed to turn the unit ON and to cycle through 
the three play modes. 
A. Lightning dock mode: the Power/Mode indicator light is BLUE and the device docked in the Lightning dock will play.
B. USB mode: the Power/Mode indicator light is GREEN and the device connected to the USB port will play.
C. Aux-in mode: the Power/Mode indicator light is RED and the aux-in mode is activated (press play on the device to 

play it).

 Note that a docked iPad, iPhone or iPod (or one connected to the USB port) will continue to charge when the unit is turned 
off as long as the AC adaptor is plugged in. 
Press and hold the     Power/Mode Button to turn the unit off.
TIP: You can also turn the unit ON automatically by docking a playing device or connecting one to the USB port, and turn 
the unit OFF by disconnecting a playing device from the dock OR USB port.

3

P6