AMANO HandPunch 1000 Installationsanweisungen
HandPunch 1000 Installation and Operation Manual
Revision 1.2
Page 43
8.10
Enrollment Menu
Enrollment is the process of recording a hand image and associating it with an ID
number. The first person to enroll in the HandPunch has access to all command menus.
This person should enroll using the Add Supervisor command (see page 48). Once a
supervisor has been enrolled, all further enrollments use the following rules:
number. The first person to enroll in the HandPunch has access to all command menus.
This person should enroll using the Add Supervisor command (see page 48). Once a
supervisor has been enrolled, all further enrollments use the following rules:
•
A user enrolled through the Add Employee command (page 48) is assigned
Authority Level 0. This allows the user to punch in and/or gain access through a
door secured by the HandPunch.
Authority Level 0. This allows the user to punch in and/or gain access through a
door secured by the HandPunch.
•
A user enrolled through the Add Supervisor command (see page 48) is assigned
Authority Level 5. This allows the supervisor to punch in and gain access through
a door secured by the HandPunch, and it allows the supervisor to access all
command menus.
Authority Level 5. This allows the supervisor to punch in and gain access through
a door secured by the HandPunch, and it allows the supervisor to access all
command menus.
Until a user has been assigned to Authority Level 5 using the Add Supervisor
command, every user with Authority Level 0 can access every menu. This is done to
ensure that the first person enrolled is able to access all the menus to perform all the
programming required to support the HandPunch. Once a user has been enrolled
using the Add Supervisor command, all further user authority levels are assigned as
per the list above. This protects the integrity of the system by enacting the Authority
Level rules described above. Recognition Systems strongly recommends enrolling at
least two users as supervisors to ensure that more than one person has the authority to
access all menus and all commands.
command, every user with Authority Level 0 can access every menu. This is done to
ensure that the first person enrolled is able to access all the menus to perform all the
programming required to support the HandPunch. Once a user has been enrolled
using the Add Supervisor command, all further user authority levels are assigned as
per the list above. This protects the integrity of the system by enacting the Authority
Level rules described above. Recognition Systems strongly recommends enrolling at
least two users as supervisors to ensure that more than one person has the authority to
access all menus and all commands.
Advance planning and training make enrollment fast and easy. Users should be
informed on what to expect and how to place their hands on the HandPunch before
you enroll them.
informed on what to expect and how to place their hands on the HandPunch before
you enroll them.
8.10.1
Navigating the Setup Command Menu
Enter the appropriate password to enter the Setup command menu. Once you have
entered the command menu, there are three options available for navigating the
command menu system.
entered the command menu, there are three options available for navigating the
command menu system.
•
Press
to enter the command shown on the display.
•
Press
to step to the next command in the menu.
•
Press
to exit the command menu (pressing any numeric key also exits
the command menu). If you are in a command’s sub-menu, press
multiple times to completely exit the command menu.
NOTE
#
*
CLEAR
CLEAR