AMANO HandPunch 1000 Installationsanweisungen
HandPunch 1000 Installation and Operation Manual
Revision 1.2
Page 47
•
If you enter your ID number, but do not place your hand on the platen, the
HandPunch will time-out in about 25 seconds. You can immediately end this time-
HandPunch will time-out in about 25 seconds. You can immediately end this time-
out by pressing the
key.
8.10.8
Beeper and LED Status During Verification
The HandPunch’s beeper and LED status display also display hand verification
information. This information is defined in Table 9.
information. This information is defined in Table 9.
8.10.9
Enrollment Commands
There are three commands available from the Enrollment command menu.
•
Add Employee
•
Add Supervisor
•
Remove User
Refer to Table 10 on page 48 and identify the command you need to perform. Step
through all previous commands until you reach the desired command.
through all previous commands until you reach the desired command.
CLEAR
Table 9: Beeper and LED Status During Verification
Operation
Beeps
LED
Meaning
During Keypad
Entry
Entry
1 per Keystroke
–
Keystroke
Accepted
Accepted
After ID Entry
–
–
OK - Proceed
After ID Entry
2
–
ID Number Not in
Database
Database
After Hand
Placement
Placement
1
Green
ID Verified
After Hand
Placement
Placement
2
Red
ID Not Verified -
Try Again
Try Again
After Hand
Placement
Placement
1 Long
Red
ID Refused