AMANO FPT-40 Fingerprint Installationsanweisungen
FPT-40 Installation & Operation Guide
Page iii
Basic Installation for Time Guardian FPT-40/A843 Package
Step 1 –
Wall Mount the FPT-40.
Connect the FPT-40 terminal using
direct connection with included USB
cable to host PC, or Ethernet cable for
network connection. Plug the in the AC
adapter to the FPT-40 and AC outlet and
the FPT-40 terminal will power up.
direct connection with included USB
cable to host PC, or Ethernet cable for
network connection. Plug the in the AC
adapter to the FPT-40 and AC outlet and
the FPT-40 terminal will power up.
Step 2 –
Install the Time Guardian
Software on the host PC. The
installation should start automatically,
but if it stalls, browse on CD to
Disk1\InstData\Windows\VM\install.exe
installation should start automatically,
but if it stalls, browse on CD to
Disk1\InstData\Windows\VM\install.exe
All employees must be enrolled at the FPT-40 terminal
with fingerprint and/or PIN password for identification
and validation. This employee information will be
synchronized with Time Guardian by performing polling
and downloading commands from the Time Guardian
software. This action is necessary to save the biometric
fingerprint templates for newly enrolled employees in
the Time & Attendance database while sending time,
Daylight Saving Time settings, hours worked for the
current payperiod, and employee assignments to the
FPT-40 terminal.
with fingerprint and/or PIN password for identification
and validation. This employee information will be
synchronized with Time Guardian by performing polling
and downloading commands from the Time Guardian
software. This action is necessary to save the biometric
fingerprint templates for newly enrolled employees in
the Time & Attendance database while sending time,
Daylight Saving Time settings, hours worked for the
current payperiod, and employee assignments to the
FPT-40 terminal.