Alvarion BreezeMAX Wi and BreezeACCESS Wi 214486 Benutzerhandbuch
116
Operation
Chapter 4 - System Configuration
WPA2: Clients using WPA2 over 802.1X are accepted for authentication.
WPA2-PSK: Clients using WPA2 with a Pre-shared Key are accepted for
authentication.
authentication.
WPA-WPA2-mixed: Clients using WPA or WPA2 over 802.1X are accepted for
authentication.
authentication.
WPA-WPA2-PSK-mixed: Clients using WPA or WPA2 with a Pre-shared Key are
accepted for authentication.
accepted for authentication.
WPA Configuration – Each VAP interface can be configured to allow only
WPA-enabled clients to access the network (Required), or to allow access to both
WPA and WEP clients (Supported). (Default: Required)
WPA-enabled clients to access the network (Required), or to allow access to both
WPA and WEP clients (Supported). (Default: Required)
Cipher Suite – Selects an encryption method for the global key used for multicast
and broadcast traffic, which is supported by all wireless clients.
and broadcast traffic, which is supported by all wireless clients.
WEP: WEP is used as the multicast encryption cipher. You should select WEP
only when both WPA and WEP clients are supported.
only when both WPA and WEP clients are supported.
TKIP: TKIP is used as the multicast encryption cipher.
AES-CCMP: AES-CCMP is used as the multicast encryption cipher. AES-CCMP
is the standard encryption cipher required for WPA2.
is the standard encryption cipher required for WPA2.
WPA Pre-Shared Key Type – If the WPA or WPA2 pre-shared-key mode is used, all
wireless clients must be configured with the same key to communicate with the
AP.
wireless clients must be configured with the same key to communicate with the
AP.
Hexadecimal – Enter a key as a string of 64 hexadecimal numbers.
Alphanumeric – Enter a key as an easy-to-remember form of letters and
numbers. The string must be from 8 to 63 characters, which can include
spaces.
numbers. The string must be from 8 to 63 characters, which can include
spaces.