Alvarion BreezeMAX Wi and BreezeACCESS Wi 214486 Benutzerhandbuch
System Management Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
147
Default Setting
admin
Command Mode
Global Configuration
Example
5.5.5
password
After initially logging onto the system, you should set the password. Remember to
record it in a safe place. Use the no form to reset the default password.
record it in a safe place. Use the no form to reset the default password.
Syntax
password <password>
no password
no password
password - Password for management access.
(Length: 3-16 characters, case sensitive)
(Length: 3-16 characters, case sensitive)
Default Setting
smcadmin
Command Mode
Global Configuration
Example
5.5.6
ip ssh-server enable
This command enables the Secure Shell server. Use the no form to disable the
server.
server.
Syntax
ip ssh-server enable
no ip ssh-server
no ip ssh-server
Default Setting
Interface enabled
Command Mode
Interface Configuration (Ethernet)
Command Usage
The AP supports Secure Shell version 2.0 only.
Enterprise AP(config)#username bob
Enterprise AP(config)#
Enterprise AP(config)#password
Enterprise AP(config)#