Alfa Romeo 147 Benutzeranleitung
GETTING TO KNOW YOUR CAR
SYSTEM ACTIVATION
IMPORTANT Opening the driver’s door
the Selespeed starts the hydraulic part of
the system to prepare it for when the en-
gine is started.
the system to prepare it for when the en-
gine is started.
Turning the ignition key to
MAR, all the
segments of the gear display (
fig. 129),
the gearbox failure warning light (
fig.
130) and the word CITY light up. After
about one second, the display indicates the
gear engaged (
about one second, the display indicates the
gear engaged (
N, 1, 2, 3, 4, 5, R).
IMPORTANT If after 10 seconds the dis-
play segments do not display the gear en-
gaged or the failure warning light stays on,
turn the ignition key to
gaged or the failure warning light stays on,
turn the ignition key to
STOP and wait for
the display to go off, then repeat the sys-
tem activation procedure. If the fault pre-
sists, contact Alfa Romeo Authorised Ser-
vices.
tem activation procedure. If the fault pre-
sists, contact Alfa Romeo Authorised Ser-
vices.
With gearshift to
CITY gears can still be
shifted manually using the gearshift lever or
the steering wheel controls. Geashift stays
in
the steering wheel controls. Geashift stays
in
CITY.
The gear engaged (
fig. 129) is shown
on the display regardless of the mode se-
lected.
lected.
N = neutral;
1 = first gear;
2 = second gear;
3 = third gear;
4 = fourth gear;
5 = fifth gear;
R = reverse.
In the
CITY mode the selected position is
shown.
A warning light connected with the corre-
sponding failure message (“GEARBOX FAIL-
URE”) (
URE”) (
fig. 130) and a buzzer attract the
attention of the driver in the event of a fault
of the Selespeed transmission.
of the Selespeed transmission.
fig. 129
A0A9017g
fig. 130
A0A9118g
115
110-185_Alfa147 Q2 GB 4-07-2008 12:02 Pagina 115