Alfa Romeo 147 Benutzeranleitung

To do this (possible only with dipped

beams turned on) proceed as follows

▲/▼:

– press the button to increase by one po-

sition (e.g.: 

➟ 1 ➟ 2 ➟ 3);

– press the button to decrease by one po-

sition (e.g.: 

➟ 2 ➟ 1 ➟ 0);

The display (

A), in the tachometer, shows

the positions while adjustment is being
made.

fig. 167

A0A1116m

The adjustment of the headlights is vital to

your safety and comfort and to that of oth-
er road users.

The adjustment of the headlights is also

governed by precise regulations.

Contact Alfa Romeo Authorised Services to

have the headlights correctly adjusted.

IMPORTANT A slight layer of steam

(fogging) can appear on the inside surface
of the beam transparent cover: this is not
a defect. The presence of condensate traces
in beams is a natural phenomenon, due to
a low temperature and to the degree of hu-
midity in the air. These traces will disappear
when the beams are turned on. Drops of wa-
ter inside the headlight indicate instead wa-
ter infiltration: contact Alfa Romeo Autho-
rised Services. 

COMPENSATION FOR TILT
(fig. 167)

When the car is loaded, the beam from the

headlights is raised due to the backwards
tilt of the car.

In this case the headlights must be ad-

justed correctly.

110-185_Alfa147 Q2 GB  4-07-2008  12:02  Pagina 137