Alfa Romeo 147 Benutzeranleitung
CORRECT USE OF THE CAR
195
INSTALLATION LAYOUT
(fig. 2)
(fig. 2)
The tow hook structure must be fastened
in the points shown by the symbol
Ø
using 8 M10 screws and 4 M12 screws.
The counter-plates (
1), (2) should have
a minimum thickness of 6 mm.
The counter-plates (
3), (4) should have
a minimum thickness of 5 mm.
The fastening points (
5) should be fitted
with Ø 20 x 4.5 mm spacers.
The hook should be fastened to the body
avoiding any type of drilling and trimming
of the rear bumps that remains visible when
the hook is removed.
of the rear bumps that remains visible when
the hook is removed.
IMPORTANT It is compulsory to fasten
a label (plainly visible) of suitable size and
material with the following wording:
material with the following wording:
MAX LOAD ON BALL 60 kg.
Any electric brake should be supplied di-
rectly by the battery through a cable with
a cross-section of no less than 2.5 mm
a cross-section of no less than 2.5 mm
2
.
In addition to the electrical branches, the car
electric system can only be connected to the
supply cable for an electric brake and to the
cable for an internal light, though not above
15W.
electric system can only be connected to the
supply cable for an electric brake and to the
cable for an internal light, though not above
15W.
186-196_Alfa147 Q2 GB 4-07-2008 12:03 Pagina 195