Alfa Romeo 147 Benutzeranleitung

Seite von 286
IN AN EMERGENCY
203
For versions with alloy rims: 
– Tighten the pin (
A-fig. 9) in one of
the fastening bolt holes on the wheel hub. 
– Insert the wheel on the pin and, using
the wrench provided, tighten the four bolts
available. This is facilitated by the exten-
sion provided (
B).
– Remove the pin (
A-fig. 9) and tight-
en the last fastening bolt. 
– Lower the car and remove the jack. 
– Using the wrench provided, tighten
the bolts in the sequence shown previously
for the compact spare wheel 
fig. 8.
After refitting a wheel: 
– stow the spare wheel in the space pro-
vided in the boot 
– insert the jack in its container forcing
it lightly to prevent it from vibrating when
travelling
– place the tools used in the housings in
the container 
– stow the container complete with tools
on the spare wheel and secure every
thing with the clamping device (
A-fig.
3)
– correctly re-position the stiff cover. 
Versions with VDC excluded 
fig. 7
A0A0155m
fig. 8
A0A0156m
fig. 9
A0A0157m
travel for approx. 30 km
(20 minutes) on a mixed
road or approx. 15 km (10 min-
utes) on a highway until the soft-
ware of the ABS/ASR control unit
recognises the size of the “normal”
wheel; in this period of time the car
may slightly go adrift on a side
during brakig and the ASR warn-
ing light (if fitted) may come on.
Therefore it is recommended to
travel carefully and to avoid,
where possible, sharp braking. On
cars fitted with ASR travel for the
above mentioned distance with
the ASR turned off through the
suitable button.
WARNING
After using the spare
wheel and refitting the
standard wheel, it is necessary to 
WARNING
197-233_Alfa147 Q2 GB  4-07-2008  12:04  Pagina 203