Alfa Romeo 147 Benutzeranleitung

REVERSING LIGHT 
AND REAR FOG GUARDS 
(fig. 30-31)

The reversing light and rear fog guard are

in the tail light until fastened to the tailgate;
they are to be found respectively one on the
right and the other on the left of the car fac-
ing forwards. 

To change the bulb, proceed as follows: 

– Open the tailgate. 

– Remove the cap (

A) then, using the ex-

tension with the screwdriver provided (work-
ing as illustrated), loosen the fastening nuts
(

B) of the light unit concerned. 

fig. 30

A0A0167m

fig. 32

A0A0169m

– Withdraw the light unit outwards. 

– Slacken the electric connector (

C).

– Slacken the screws (

D), and remove

the bulb holder. 

– Remove the bulb pushing gently and

turning counterclockwise. 

– Replace the bulb, then refit the bulb

holder and tighten the screws (

D).

– Re-tighten the electric connector (

C).

– Refit the light unit on the tailgate tight-

ening the nuts (

B), then refit the cap (A)

pressing it on. 

(fig. 32-33)

The rear direction indicators and the side

lights-braking lights are in the tail light unit
fastened to the body. 

To change the bulb, proceed as follows: 

– From inside the boot, open the pre-

formed trim (

A) then, using the extension

and the screwdriver provided (working as il-
lustrated), slacken the nuts (

B) fastening

the light unit. 

– Withdraw the light unit outwards.

fig. 31

A0A0168m

197-233_Alfa147 Q2 GB  4-07-2008  12:04  Pagina 216