Alfa Romeo 147 Benutzeranleitung
IN AN EMERGENCY
221
IN THE EVENT OF A BLOWN FUSE
GENERAL
The fuse is a protective device for the elec-
tric system: it comes into action (i.e. it cuts
off) mainly due to a fault or improper action
on the system.
off) mainly due to a fault or improper action
on the system.
When a device does not work, check the
efficiency of its fuse. The conductor ele-
ment(
ment(
A-fig. 46) must be intact; if not,
replace the fuse with one of the same amp
rating (same colour).
rating (same colour).
(
B) - Undamaged fuse
(
C) - Fuse with damaged filament.
Remove the blown fuse using the pincer
provided (
D), in the control box.
fig. 46
A0A0185m
Never replace a fuse with
metal wires or anything
else. Always use an intact
else. Always use an intact
fuse of the same colour.
– Open the the protective cover (
B) and
replace the bulb releasing it from the side
contacts, making sure that the new bulb is
correctly clamped between the contacts.
contacts, making sure that the new bulb is
correctly clamped between the contacts.
– Close the protective cover (
B).
– Refit the light unit inserting it in its cor-
rect position firstly on one end and then on
the other until it clicks into place.
the other until it clicks into place.
fig. 45
A0A0184m
197-233_Alfa147 Q2 GB 4-07-2008 12:04 Pagina 221