Alfa Romeo 147 Benutzeranleitung

Seite von 286
IN AN EMERGENCY
230
IF THE CAR IS TO BE TOWED 
The tow ring supplied with the car is
housed in the tool box under the boot mat. 
To install the tow ring, proceed as follows: 
– Take the tow ring from the tool box. 
– Remove the cover (
A) snap-fitted on
the front (
fig. 52) or rear bumper (fig.
53). To do this, if using the flat-bladed
screwdriver provided, protect the tip with a
soft cloth to avoid damaging the car. 
– Firmly screw the ring in its housing. 
fig. 52
A0A1083m
fig. 53
A0A1084m
Before tightening the ring
carefully clean the thread-
ed housing. Before beginning to
tow the car, make sure that the
ring is firmly tightened in its
threaded housing. 
WARNING
Before starting to tow,
turn the ignition key to
MAR and back to STOP again with-
out removing it. Removing the key
automatically engages the steering
lock resulting in the impossibility
to steer the wheels. When towing
remember that without the help of
the engine brake and power steer-
ing greater effort is required on the
pedal and steering wheel. Do not
use flexible cables for towing and
avoid jerks. During towing opera-
tions make sure that fastening the
joints does not damage the com-
ponents in contact with it. When
towing the car, it is compulsory to
follow specific traffic regulations
concerning both the towing device
and behaviour on the road. 
WARNING
197-233_Alfa147 Q2 GB  4-07-2008  12:04  Pagina 230