Alfa Romeo 147 Benutzeranleitung

Seite von 286
COLD TYRE INFLATION PRESSURES
CUSTOMER SERVICES
TECHNICAL SERVICES - SERVICE ENGINEERING
Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)
Fiat Group Automobiles S.p.A.
Pubblication no. 60431857 - 1
st
Edition - 06/2008
All rights reserved. Reproduction, even in part, is prohibited without written permission
from Fiat Group Automobiles S.p.A.
S E R V I C E
ENGINE OIL REPLACEMENT
Oil sump and filter  ......................
litres 4.4 (4.5 for JTD
M
versions)
Do not discard used oil in the environment.
REFUELLING
Fuel tank capacity............................................................ litres 60
Reserve ............................................................................ litres 7
For cars with petrol engine, only use unleaded petrol with over 95 R.O.N.
(Specification EN228).
For cars with diesel engine, only use Diesel fuel for motor vehicles (Spec-
ification EN590). 
Tyres
215/40 ZR18” ()
Reinforced
front
rear
2.4
2.4
2.7
2.7
Tyres
195/60 R15”
front
rear
2.2
2.2
2.5
2.5
Compact spare wheel 
125/80 R15”
4.2
Tyres
185/65 R15”
front
rear
2.2
2.2
2.5
2.5
Tyres
205/55 R16” ()
front
rear
2.3
2.3
2.6
2.6
Tyres
215/45 R17” ()
front
rear
2.4
2.3
2.7
2.6
reduced load
full loadr
(•) Unchainable tyres 
With the tyre hot the inflating pressure should be +0.3 bar compared with the specified rating.
With winter tyres the inflation pressure should be +0.2 bar higher than the rating specified for standard tyres.
Inflate tyres to full load pressures if driving at continuous speed exceeding 160 km/h.
278-284_Alfa147 Q2 GB  4-07-2008  12:07  Pagina 284