Alfa Romeo 147 Benutzeranleitung

The device is disengaged automatically in

any of the following cases:

– pressing the brake pedal;
– pressing the clutch pedal;
– if the ASR, MSR OR VDC systems cut in;
– with Selespeed transmission if a gear is

changed;

– inadvertently moving the Selespeed

gear control lever to 

N.

(fig. 70)

Cruise Control is controlled by the

ON/OFF knurled ring (A), by the +/–
ring(

B) and by the RES button (C).

Ring (

A) has two positions:

–

OFF in this position the device is deac-

tivated;

The speed regulator (

TROL), with electronic control, makes it
possible to drive the car at the required
speed without pressing the accelerator ped-
al. This reduces driving fatigue during long
journeys because the speed memorised is
automatically maintained.

IMPORTANT The device can only be en-

gaged at speeds between 30 and 190
km/h.

fig. 70

A0A0077m

–

ON is the normal operating position of

the device. When the ring  (

A) is in this

position, the warning light 

Ü on the instru-

ment cluster turns on.

Ring (

B) serves for memorising and main-

taining the car sped or for increasing or low-
ering the speed memorised.

Turn the ring (

B) to (+) to memorise the

speed reached or increase the speed memo-
rised.

Turn the ring (

B) to (–) to lower the speed

memorised.

Each time the ring is actuated (

B) the speed

increases or lowers by about 1.5 km/h. 

Keeping the ring turned the speed changes

continuously. The new speed reached will be
maintained automatically.

The

RES button (C) resets the memorised

speed.

IMPORTANT Turning the ignition key to

STOP or the ring (A) to OFF, the speed
memorised is cleared and the system is
switched off.

001-057 Alfa 147 Q2 GB  4-07-2008  11:58  Pagina 49