Alfa Romeo 159 Benutzeranleitung

SAFETY 

DEVICES

W

ARNING 

LIGHTS AND 

MESSAGES

IN AN 

EMERGENCY

TECHNICAL 

SPECIFICA

TIONS

INDEX

CORRECT USE 

OF THE CAR

DASHBOARD

AND 

CONTROLS

If the jet of fluid is missing, firstly check
that there is fluid in the reservoir: see
“Checking fluid levels” in this section).

Then check that the nozzle holes are not
clogged, if necessary use a needle.

Fluid jets shall be directed at about 1/3
height from the window upper edge.

Regularly check that the spray jets are
intact and clean.

The headlight washers are automatical-
ly switched on when the windscreen
washer is operated and the dipped
beams are on.

How to remove the blade:

– raise the windscreen wiper arm 

A;

– turn the blade 

B by 90° around pin

C, on the final section of the arm;

– remove the blade from the pin 

C.

How to refit the new blade:

– fit pin 

C into the hole in the middle

of the blade 

B;

– refit the arm with the blade on the
windscreen.

A0E0080m

fig. 19

223-248 Alfa 159 GB  3-12-2009  14:11  Pagina 243