Aiwa TP-M140 Benutzerhandbuch

Use a soft cloth ligtly moistened with a mild detergent solution.  Do not use strong
solvents such as alcohol, benzine or thinner.

Micro cassette,  2 tracks 1 channel, monaural

 (Normal position type)

250 – 5,000 Hz  (2.4 cm/sec)  EIAJ

2.4 cm/sec or 1.2 cm/sec switchable

Electret condenser microphone (monaural)

170 mW (EIAJ/DC)

EARPHONE jack (monaural mini-jack) (1)

EXT MIC jack (monaural mini-jack)

DC 3 V jack

Diameter 36 mm, 4 ohms

DC bias

Magnet erasure

DC 3 V using two size AA (R6) batteries
AC house current using an optional AC adaptor Aiwa AC-D302

63.8 (W) 

×

 122 (H) 

×

 25.7 (D) mm

(2 

5

/

8

 

×

 4 

7

/

8

 

×

 1 

1

/

16

 in)

Approx. 116 g (4.1 oz) (excluding batteries)

Microcassette tape MC-60 (1)
Size AA (LR6) dry cell batteries (2)

Specifications and external appearance are subject to change without notice.

Please check the laws on copyright relating to recordings from discs, radio or
external tape for the country in which the machine is being used.

If the unit does not perform as expected, check the following table.

Tape does not move.

Tape transport is unstable.

There is no sound.

The sound is too low or
distorted.

The playback speed is
not correct.

Recording cannot be done.

Tape stops during recording.

• The batteries are not inserted correctly.
• The batteries are worn out.
• The unit is in pause mode.

• There is slack in the tape.
• The pinch roller and capstan are dirty.
• The tape is damaged.

• The VOL control is turned down completely.
• The earphone is not connected firmly when

listening with the earphone.

• The recording/playback head is dirty.
• The batteries are worn out.

• The TAPE SPEED switch is set to the wrong

position.

• The erasure prevention tab on the recording

side of the cassette has been removed.

• Set the V-SENSOR switch to OFF when not

using the V-SENSOR function.